IS SS Horizontal Single-Stage Centrifugal Pump

IS SS Horizontal Single-Stage Centrifugal Pump

Installation requirements
SI Stainless steel horizontal single-stage centrifugal pump is the direct connection by pump shaft ,composed of pump ,pump shaft and standard motor:
1,The pump shall be installed on the ventilating and anti-freezing place;
2,The installation of the pump shall ensure that the pump will not be infIS SS Horizontal Single-Stage Centrifugal Pumpced by the tension of pipeline;
3,If the pump is installed outdoor ,suitable outer cover must be configured to prevent electric elements from water inflow or coagulating dew;
4,To facilitate in section and maintenance ,enough space must be left around the machine group ;
5,Electric wiring device shall guarantee that the pump will not be damaged by lack of phase ,unstable voltage ,current leakage and overload ;
6,The pump shall be installed on the pedestal horizontally .Horizontal direction is the suction port for the pump ,and vertical direction is the discharge port for the pump .

Operating condition
Clean, thin, non-flammable and explosive, not containing the liquid with solid particle and fibre;
Liquid temperature -20°C/ +100°C;
Ambient temperature: up to+40°C;
Altitude: up to 1000m;
Max. pressure of the system is 10bar.

Motor
TEFC motor,2-pole;
Protection class:IP55;
Insulation class: F;
Standard voltage,
50Hz: