environmental single stage centrifugal water pump

Model S pump is a single stage double suction horizontal centrifugal water pump. It is used for conveying water or water with chemical properties similar to water, which is not more than 80degrees centigrade. It is suitable for water supply and drainage and various water conservancy projects in mines, metallurgy, cities, power stations, water supply and drainage. The product has high efficiency, energy saving, good performance, high standardization and high degree of generalization.

The pumps mean that:For example 150S78A

150-------Pump’suction diameter:150mm

S --------Single stage double suction centrifugal pump

78 ------Head:78m

A --------Pump impeller diameter first cut

Type S pump is used to transfer clean water with a Max.Temperature pumped not more than 80℃ and other liquid which have a similar physical and chemical character.
If the bearing on both sides of pump are cooled by water.The temperature pumped can be up to 130℃.
According to the customers’ specific order requirements.This series pumps can meet the following conditions;
1)The pump can transfer water that contains a little bit of sand and muds.
2)The shell of the pump can endure 1.6MPa pressure.
3)Shaft seals on both sides are fit with mechanical seals.