horizontal ash horizontal centrifugal ash slurry pump

horizontal ash horizontal centrifugal ash slurry pump

About Us

1. We are 20years horizontal ash horizontal centrifugal ash slurry pump professional horizontal phosphate removel slurry pump manufacturer in China.

2. Top quality of raw material castings.

3. Advanced equipment with mature experiences engineers.

4. Large size factory with strictly quality control system.

horizontal centrifugal ash slurry pump Parameter

1. Size range (discharge):1-18inch

2. Capacity: 10-5400 m3/h

3. Head: 5-125m

4. Impeller type: Non-clog (open &close)

5. Shaft sealing: Packing/Gland packing & Mechanical

6. Wet parts material: A05,A07, Rubber

horizontal centrifugal ash slurry pump Overview

1. Cantilever phosphate removel slurry pump is horizontal, cantilevered, centrifugal, single stage slurry pump.

2. Long bearing life: The bearing assembly is with large diameter shaft and short overhang.

3. Wear resistant and anti-abrasion wet parts: A05, A07, A33, A49 and rubber etc.

They are completely interchangeable with each other.

4. Easily replaceable liners: Liners are bolted to the casing.

5. Easy adjustment of impeller: An impeller adjustment mechanism is provided below the bearing housing.

6. Discharge direction can be positioned at intervals of 45 degrees.

7. Simple maintenance throat-bush: the mating face of the throat bush is tapered, so the wear is reduced

and removal is simple.

8. Sealing type: packing seal, impeller sealing and mechanical seal.

9. Widely application: They are designed for handling abrasive, high density slurries in the metallurgical,

mining, coal, power, building material and other industrial departments.

horizontal centrifugal ash slurry pump Structure

horizontal centrifugal ash slurry pump Features

1. The wet parts for horizontal phosphate removel slurry pump is made of wear-resistant high chromium alloy.

2. The bearing assembly of Cantilever horizontal phosphate removel slurry pump use cylindrical structure,

adjusting the space between impeller and front liner easily. They can be removed completely

when being repaired. Bearing assembly use grease lubrication.

3. The shaft seal could use the packing seal, expeller seal and mechanical seal.

4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to

any eight positions to suit installations and applications.

5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and

frequency conversion drive devices for the slurry pump.

6. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage

series to meet the delivery for long distance.

horizontal centrifugal ash slurry pump Photo