WX219 ERW Tube making machine ms pipe making machine

WX219 ERW Tube Mill

Specifications for (tubular profile galvanize machine roll forming)

It produces round pipes of dia.38mm-63mm, square pipe: 30X30-50X50mm, rectangular pipe: 25X50-40X60mm, thickness 1.0-3.0mm.

Product overview for (tubular profile galvanize machine roll forming)

WX219 ERW Tube Mill is the machine to produce the tube/pipe based on the customers requirements, through advenced FFX forming type. roll forming machine has the advantage of the longlife working, effective output and easily mould/roller change. famous around the world and get high feedback from china and overseas.

know more please check web:

1. http://www.steelpipemills.com/
2. http://bzwanxin.en.WX219 ERW Tube making machine ms pipe making machine.com/
3. http://www.cnwanxin.com/

tubular profile galvanize machine roll forming

tubular profile galvanize machine roll forming

tubular profile galvanize machine roll forming

tubular profile galvanize machine roll forming

tubular profile galvanize machine roll forming

1. Summary

This high frequency welded pipe production line is used to produce round pipes of diameter Φ38mm-Φ63mm, square pipe: 30X30-50X50mm, rectangular pipe: 25X50-40X60mm, thickness 1.0-3.0mm. The material is cold and hot roll mild steel and galvanized roll mild steel plate (CR, HR & GI). The production line machinings are good quality and high precision assembly. The finished pipes can be used in the fields of metallurgy, construction, traffic, machinery and vehicle.

2. Pipe Spec. Table

3. Production Process

Coil preparing → Uncoiling → Shear/end welding → Strip delivering → Strips accumulator → forming and sizing → flying saw → output runway → packaging → storage

4. Main technical parameters

• Material: low carbon steel, low alloy steel, tensile strength σb≤450MPa, yield strength σs≤350MPa

• Strip width: 60-200mm

• Strip thickness: 1.0-3.0mm

• Pipe spec. : round pipe: dia. 38-63mm; square pipe: 20X20-50X50mm; rectangular pipe: 25X50-40X60mm.

• Pipe length: 6m±3mm

• Coil spec : coil ID φ450-φ550mm; coil weight ≤2MT

• Heating mode: 250KW solid-state HF induction heating

• Forming speed: 70-90m/min

• Electrical installed capacity: Approx. 500KW

• Compressed air: 4-6 kg/cm²

• Cooling water flow: 20m³/h

5. Main machines

5.1 Uncoiler

Structure: The double work station decoiler, it is manual rotary type and double work station manual harmomegathus. It contains two main parts: main body and the fixed base. The main body is equipped with expanding and contracting system, braking of the mandrels, one cone is working and the other is preparing, then turn 180°to work.

Parameters:

Strip width: 60-200mm

Coil OD: Φ1500mm

Coil weight: 0.5-2.0MT

5.2 Shear/end welder

In the shear/end welder the ends of the coils are cropped, precisely aligned and welded together in the shortest possible time.

5.3 Two rollers delivery machine

It is mainly gantry type frame, the lower roller drive, equipped with guidance vertical rollers and horizontal material pressure rollers. It can deliver the after welded steel strips into the material collecting box, maintaining enough material in material accumulator.

5.4 Cage type accumulator

A continuous production process is ensured by accumulator, which bridges the standstill time in the strip preparation section during the welding of the coil ends. The structure is overall frame type, made of fixed frame, activity frame, and strip support rollers and tension rollers. It is adjustable freely based on the strips width.

Parameters:

5.5 Forming and sizing machine

This machine adopts roller type forming principle and high-frequency induction welding. The strip is fed into the forming machine by the feeding device in the mill and the forming roller continuously rotate and press the strip into the required shape.

Structure: forming section, sizing section, guiding device, squeezing rollers, outer scraping, water cooling, and turkey heads.

Stands no.:

Feeding section: 1 level roll stand, 1 guiding side roll stand, 1 five-roll straighter.

Forming section: 7 level roller frames, 8 vertical roller frames;

Sizing section: 6 level roller frames, 5 vertical roller frames, 1Turk’s head

5.6 Computer control flying saw

Computer control flying saw is used for cutting tubes to length in the line. It is mainly consists of lathe bed, gears, rack cabinets, saw car, clamps, speed measurement system, driving system, electrical system, carrier rollers and so on.

5.7 Pipe Output conveyor and packaging machine

The pipe output conveyor consists of runway, reverser, and pipe bench.

Runway: is used for conveying the finished pipe from flying saw to the packaging machine.

Reverser: it is an auxiliary device, can achieve carrying the pipe from runway to the bench by its turnover mechanism.

Pipe bench: A carrier for temporarily storing steel pipes on it in order to leave times for packaging pipes.

Packaging machine: can be hydraulic or manual type.

Profile Steel is used to mount, brace, support, and connect lightweight structural loads in building construction. These include pipes, electrical and data wire, WX219 ERW Tube making machine ms pipe making machine mechanical systems such as ventilation, air conditioning, and other mechanical systems. Strut channel is also used for other applications Profile Steel that require a strong framework, such as workbenches, shelving systems, equipment racks, etc. Specially made sockets are available to tighten nuts; bolts etc.
KJJKGJH
Profile Steel is equipped with excellent equipments including two sets 1450 reversible rolling mills,WX219 ERW Tube making machine ms pipe making machine three sets 1150 reversible rolling mills, two sets galvanizing & galvalume lines, two sets color coating lines, one set correcting machine, and one set pickling line.