S,SH series split case electric motor irrigation pump

S,SH series split case electric motor irrigation pump

Technical Parameter:

a) Capacity: 112-3600m3/h
b) Head: 9-140m
c) Motor power: 18.5-850kw

d) Working temperature: less than 80°C

Production Overview:

Split case water pump is a single-stage double-suction horizontal split centrifugal pump

and used to transport pure water and the liquid of both physical and chemical nature similar

to those of water, the maximum temperature of which must not be over 80 ,suitable for water

supply and drainage in factories, mines, cities and electric stations, waterlogged land drainage

and irrigation of farming land and carious hydraulic projects.

Structure Details:

a)The casing is axially split with the suction and discharge branches located in the lower
half,so it allows the complete pump rotor with bearings to be removed for maintenance
without disturbing the main pipework and valves.Short inspection and maintenance times.
b)Impeller is symmetrically arranged.Rotor is in hydraulic balance.

c)Double volute casing reduced radial thrust and bearing loads.
e)Sizes of seal chamber comply with API682 specification.Seal chamber is designed to
accommodate all single, tandem,dual and cartridge seal configurations. Cartridge seal is
standard type.

f)Replaceable wear rings prevent the main components from being worn out.

Application:

The pumps are suitable for pumping clean liquids or liquids with some tolerance of slight

contamination by solids.

They are used for pumping liquids for petrochemical process,forwater supply and treatment,

in irrigation,in district heating plans,in the paper and pulp industries, as marine ballast and

cooling water pumps,in sea water desalination plants.As well as being used for other similar

usefulness. SH pumps can also be used as energy recovery turbines.