Sand suction pump sand water mixed suction pump

Sand suction pump sand water mixed suction pump

Sand suction pump sand water mixed suction pump parameters

a) Caliber: DN100-DN400mm
b) Flow:70-3600m3/hr
c) Head:3-75 m
d) Rotate speed:1450-2900r/min
e) Motor power:2.2-55 KW
f) Working temperature: ≤200°C

Sand suction pump sand water mixed suction pump overview

Type ZG(or ZGH) Sand suction pump sand water mixed suction pump are the series products introduced

from foreign technical.Sand suction pump sand water mixed suction pump are designed for continously

handling the most difficult higher abrasive slurries which contain too big soids to be pumpes by a

common pump.They are suitable for delivering slurries in Mining,Explosive-sludge in metal melting,

Dredging in dredger and course of rivers,and other fieldas.Type GHpumps are of high-head ones.

Construction of this pump is of single casing connected by means of clamp bands and wide wet passage.

The wet-parts are made of Ni-hard and high chromium abrasion-resistance alloys.The discharge direction

of pump can be oriented in any direction of 360°.This type of pump possesses the advantages of easy

installation and operation.good performance of NPSH and abrasion resitance.

Sand suction pump sand water mixed suction pump feature

Sand Gravel Dredge Pumps are Single casing structure; High efficiency, wear resistant, wide

flow channel, good ability of NPSH, stable performance, easy assembly, liner and impeller can

be made of wear-resistant metal, the discharge outlet can be adjusted at any direction, and the

pump can be driven with belt.

Sand suction pump sand water mixed suction pump parameters

Different model sand suction pump sand water mixed suction pump

Welcome contact us if any enquiry,you will get our prompt reply within 24hours!

Zidong Pump will give you professional solutions!